×

Please select which camera you’d like to connect below:

 

Ricoh Theta S, Ricoh Theta SC, or Ricoh Theta V

 

  1. Turn the camera on by pressing and holding the power button on the side.
  2. Make sure the camera is fully charged. The power button will flash blue when the battery level is low.
  3. Turn on Wi-Fi. You should see a blue Wi-Fi icon on the front of the camera. If you don’t see the icon, press the Wi-Fi button on the side.
  4. Choose photo mode. You should see a blue photo camera icon on the front of the camera. If you see a video camera icon instead, switch to photo mode using the button on the side of the camera.
  5. Make sure your phone is fully charged.
  6. On your phone, open the Settings app.
  7. Connect your phone to the 360 camera’s Wi-Fi network (which will end in “.OSC”). The default password is the set of 8 numbers after “XS” on the bottom of the camera.
  8. Return to the StructionSite App and switch to 360 mode to begin taking photos

 

LG 360

 

  1. Turn the camera on by pressing the power button on the side.
  2. Make sure the camera is fully charged. Under the power button, you’ll see a red light flash when the battery level is low.
  3. Turn on Wi-Fi. Double click the power button and the button on the front at the same time. When Wi-Fi is connected, a blue light will flash.
  4. Make sure your phone is fully charged.
  5. On your phone, open the Settings app.
  6. Connect your phone to the 360 camera’s Wi-Fi network (which will end in “.OSC”). The default password consists of “00” followed by the last 6 characters of the Wi-Fi network. For example, for Wi-Fi network LGR105_02CNDF the password is “0002CNDF”.
  7. Return to the StructionSite App and switch to 360 mode to begin taking photos

Note: If you continue to experience issues with capturing photos with StructionSite after successfully connecting your camera to your mobile device via Wifi. Please try one of the following:

  • If you get a quick message when trying to drop a 360 photo, your SD card may be full. Try checking the SD card on your computer and make sure there’s enough space, or that photos are accessible at all. If you are unable to access or remove any photos from the SD card at all, then the card may be damaged.
  • If you try to take a photo and it gets stuck transferring or gives you the message that it’s still working indefinitely, then the LG360 hardware may have frozen and will need to restart. Restart by pressing and holding the power button for at least 3 seconds until you hear 4 musical notes. Wait until it has fully shut down, then turn the camera on again and reconnect.

 

Samsung Gear 360 (2016)

 

  1. Make sure a micro SD card is inserted. The card slot is located behind the door.
  2. Turn the camera on by pressing and holding the power button on the side.
  3. Make sure the camera is fully charged. On the camera screen, you can see the battery level.
  4. Press and hold the Menu button until you see “Gear 360 Manager”.
  5. Press the Menu button twice until until you see “Google Street View”.
  6. Press the button on the top of the camera to select this mode and turn on Wi-Fi.
  7. Make sure your phone is fully charged.
  8. On your phone, open the Settings app.
  9. Connect your phone to the 360 camera’s Wi-Fi network (which will end in “.OSC”). The default password is the set of 8 numbers shown on the second line of the camera display.
  10. Return to the StructionSite App and switch to 360 mode to begin taking photos

Samsung Gear 360 (2017)

Most Gear360 2017 cameras purchased will likely require a firmware update for the camera to function with StructionSite.

  1. Make sure a micro SD card is inserted. The card slot is located on the side of the camera.
  2. Press and hold the red Power bottom on the side of the camera to turn on the camera.
  3. Make sure the camera is fully charged and that the SD card enough space to take photos. On the camera screen, you can see the battery level and number of photos that can be captured.
  4. Press and hold the Menu button (located above the power button) until “Google Street View” appears. Do NOT pick “connect to iOS”. If you do NOT see google street view appear right away, you must update the firmware of your camera below.
  5. The name of the camera’s Wifi Hospot will appear on the screen (i.e. Gear 360(XXXX).OSC), along with it’s password below
  6. Open Settings on your mobile device.
  7. Connect your phone to the 360 camera’s Wi-Fi network (which will end in “.OSC”). The default password is the set of 8 numbers shown on the second line of the camera display.
  8. Return to the StructionSite App and switch to 360 mode to begin taking photos

How to update the firmware for Gear 360 2017

  1. Go to the iOS App Store and download the Samsung Gear 360 app
  2. Open the Gear 360 App, and click “Get Connected” and follow the instructions on how to connect the camera using a special “Connect to iOS” instruction workflow
  3. When connected, go back into the Gear 360 App’s main page and go to Settings>Firmware Version
  4. You should be given instructions on updating the Camera to the latest firmware

Garmin VIRB 360

 

  1. On your VIRB 360 camera, from the main menu, select Wireless > Wi-Fi, and select the Wi-Fi toggle switch to turn on the Wi‑Fi radio.
    TIP: You can also hold  for two seconds to quickly turn the Wi‑Fi radio on or off.

    The camera broadcasts a Wi‑Fi access point. The access point name and password appear on the camera screen. While the Wi‑Fi radio is turned on, appears on the home screen, and the status LED flashes blue periodically.

  2. On your phone, open the Settings app.
  3. Connect to the camera access point using the name and password on the Garmin VIRB 360 camera screen.

Note: If StructionSite still thinks that the camera is not connected after you’ve successfully connected to Wifi and you verify that the wifi-connection works on your mobile device, please try the following:

  1. Download the Garmin VIRB 360 App and see if you’re able to control the camera. Update the Firmware if needed
  2. If that does not resolve the issue, you likely have to perform a master reset. To do so:
    1. Ensure the device is powered off
    2. Press and hold Down
    3. Press and immediately release Power
    4. Wait for the message “Erase all user data?”
    5. Release Down
    6. Select Yes

NCTech Iris 360

 

  1. Make sure a micro SD card is inserted. The card slot is located on the right side behind the foam door.
  2. Turn the camera on by moving the power switch from left to right.
  3. Make sure your camera and phone are fully charged.
  4. On your phone, open the Settings app.
  5. Connect your phone to the 360 camera’s Wi-Fi network (which will end in “.OSC”). The default password is “iris-360”.